Below are the 96 SQL Interview Questions. Do let me know what else questions & answers should we publish.
1. What is the SQL server query execution sequence?
- FROM -> goes to Secondary files via primary file
- WHERE -> applies filter condition (non-aggregate column) ○ SELECT -> dumps data in tempDB system database ○ GROUP BY -> groups data according to grouping predicate ○ HAVING -> applies filter condition (aggregate function) ○ ORDER BY -> sorts data ascending/descending
2. What is Normalization?
Step by step process to reduce the degree of data redundancy.
Breaking down one big flat table into multiple table based on normalization rules. Optimizing the memory but not in term of performance.
Normalization will get rid of insert, update and delete anomalies.
Normalization will improve the performance of the delta operation (aka. DML operation); UPDATE, INSERT, DELETE
Normalization will reduce the performance of the read operation; SELECT
3. What are the three degrees of normalization and how is normalization done in each degree?
A table is in 1NF when: All the attributes are single-valued.
With no repeating columns (in other words, there cannot be two different columns with the same information).
With no repeating rows (in other words, the table must have a primary key). All the composite attributes are broken down into its minimal component.
There should be SOME (full, partial, or transitive) kind of functional dependencies between non-key and key attributes.
99% of times, it’s usually 1NF.
A table is in 2NF when: ● It is in 1NF.
- There should not be any partial dependencies so they must be removed if they
A table is in 3NF when: ● It is in 2NF.
- There should not be any transitive dependencies so they must be removed if they
- A stronger form of 3NF so it is also known as 5NF
- We do not need to know much about it. Just know that here you compare between a prime attribute and a prime attribute and a non-key attribute and a non-key
4. What are the different database objects ?
There are total seven database objects (6 permanent database object + 1 temporary database object) Permanent DB objects
- Stored procedures
- User-defined Functions
- Indexes Temporary DB object
5. What is collation?
Bigdata Hadoop: SQL Interview Question with Answers
Collation is defined as set of rules that determine how character data can be sorted and compared. This can be used to compare A and, other language characters and also depends on the width of the characters.
ASCII value can be used to compare these character data.
6. What is a constraint and what are the seven constraints?
Constraint: something that limits the flow in a database.
- Primary key
- Foreign key
- Ex: check if the salary of employees is over 40,000
- Ex: If the salary of an employee is missing, place it with the default
- NULL or NOT NULL
- Unique Key
- Surrogate Key
- mainly used in data warehouse
7. What is a Surrogate Key ?
‘Surrogate’ means ‘Substitute’.
Surrogate key is always implemented with a help of an identity column.
Identity column is a column in which the value are automatically generated by a SQL Server based on the seed value and incremental value.
Identity columns are ALWAYS INT, which means surrogate keys must be INT. Identity columns cannot have any NULL and cannot have repeated values. Surrogate key is a logical key.
8. What is a derived column , hows does it work , how it affects the performance of a database and how can it be improved?
The Derived Column a new column that is generated on the fly by applying expressions to transformation input columns.
Ex: FirstName + ‘ ‘ + LastName AS ‘Full name’
Derived column affect the performances of the data base due to the creation of a temporary new column.
Execution plan can save the new column to have better performance next time.
9. What is a Transaction?
- It is a set of TSQL statement that must be executed together as a single logical ○ Has ACID properties:
Atomicity: Transactions on the DB should be all or nothing. So transactions make sure that any operations in the transaction happen or none of them do.
Consistency: Values inside the DB should be consistent with the constraints and integrity of the DB before and after a transaction has completed or failed.
Isolation: Ensures that each transaction is separated from any other transaction occurring on the system.
Durability: After successfully being committed to the RDMBS system the transaction will not be lost in the event of a system failure or error.
- Actions performed on explicit transaction:
BEGIN TRANSACTION: marks the starting point of an explicit transaction for a connection.
COMMIT TRANSACTION (transaction ends): used to end an transaction successfully if no errors were encountered. All DML changes made in the transaction become permanent.
ROLLBACK TRANSACTION (transaction ends): used to erase a transaction which errors are encountered. All DML changes made in the transaction are undone.
SAVE TRANSACTION (transaction is still active): sets a savepoint in a transaction. If we roll back, we can only rollback to the most recent savepoint. Only one save point is possible per transaction. However, if you nest Transactions within a Master Trans, you may put Save points in each nested Tran. That is how you create more than one Save point in a Master Transaction.
10. What are the differences between OLTP and OLAP?
OLTP stands for Online Transactional Processing OLAP stands for Online Analytical Processing
Normalization Level: highly normalized Data Usage : Current Data (Database) Processing : fast for delta operations (DML)
Operation : Delta operation (update, insert, delete) aka DML Terms Used : table, columns and relationships
Normalization Level: highly denormalized Data Usage : historical Data (Data warehouse) Processing : fast for read operations Operation : read operation (select)
Terms Used : dimension table, fact table
11. How do you copy just the structure of a table?
SELECT * INTO NewDB.TBL_Structure FROM OldDB.TBL_Structure
WHERE 1=0 — Put any condition that does not make any sense.
12. What are the different types of Joins?
- INNER JOIN: Gets all the matching records from both the left and right tables based on joining
- LEFT OUTER JOIN: Gets all non-matching records from left table & AND one copy of matching records from both the tables based on the joining
- RIGHT OUTER JOIN: Gets all non-matching records from right table & AND one copy of matching records from both the tables based on the joining
- FULL OUTER JOIN: Gets all non-matching records from left table & all non-matching records from right table & one copy of matching records from both the
- CROSS JOIN: returns the Cartesian
13. What are the different types of Restricted Joins?
- SELF JOIN: joining a table to itself
- RESTRICTED LEFT OUTER JOIN: gets all non-matching records from left side
- RESTRICTED RIGHT OUTER JOIN – gets all non-matching records from right side
- RESTRICTED FULL OUTER JOIN – gets all non-matching records from left table & gets all non- matching records from right
14. What is a sub-query?
- It is a query within a query
SELECT <column_name> FROM <table_name>
WHERE <column_name> IN/NOT IN (
<another SELECT statement>
- Everything that we can do using sub queries can be done using Joins, but anything that we can do using Joins may/may not be done using Subquery.
- Sub-Query consists of an inner query and outer Inner query is a SELECT statement the result of which is passed to the outer query. The outer query can be SELECT, UPDATE, DELETE. The result of the inner query is generally used to filter what we select from the outer query.
- We can also have a subquery inside of another subquery and so This is called a nested Subquery. Maximum one can have is 32 levels of nested Sub-Queries.
15. What are the SET Operators?
- SQL set operators allows you to combine results from two or more SELECT
SELECT Col1, Col2, Col3 FROM T1 <SET OPERATOR> SELECT Col1, Col2, Col3 FROM T2
- Rule 1: The number of columns in first SELECT statement must be same as the number of columns in the second SELECT
- Rule 2: The metadata of all the columns in first SELECT statement MUST be exactly same as the metadata of all the columns in second SELECT statement
- Rule 3: ORDER BY clause do not work with first SELECT statement. ○ UNION, UNION ALL, INTERSECT, EXCEPT
16. What is a derived table?
- SELECT statement that is given an alias name and can now be treated as a virtual table and operations like joins, aggregations, can be performed on it like on an actual table.
- Scope is query bound, that is a derived table exists only in the query in which it was
SELECT temp1.SalesOrderID, temp1.TotalDue FROM
(SELECT TOP 3 SalesOrderID, TotalDue FROM Sales.SalesOrderHeader ORDER BY TotalDue DESC) AS temp1 LEFT OUTER JOIN
(SELECT TOP 2 SalesOrderID, TotalDue FROM Sales.SalesOrderHeader ORDER BY TotalDue DESC) AS temp2 ON temp1.SalesOrderID = temp2.SalesOrderID WHERE temp2.SalesOrderID IS NULL
17. What is a View?
- Views are database objects which are virtual tables whose structure is defined by underlying SELECT statement and is mainly used to implement security at rows and columns levels on the base
- One can create a view on top of other
- View just needs a result set (SELECT statement).
- We use views just like regular tables when it comes to query (joins, subqueries, grouping)
- We can perform DML operations (INSERT, DELETE, UPDATE) on a view. It actually affects the underlying tables only those columns can be affected which are visible in the
18. What are the types of views?
- Regular View:
It is a type of view in which you are free to make any DDL changes on the underlying table.
— create a regular view
CREATE VIEW v_regular AS SELECT * FROM T1
- Schemabinding View:
It is a type of view in which the schema of the view (column) are physically bound to the schema of the underlying table. We are not allowed to perform any DDL changes
to the underlying table for the columns that are referred by the schemabinding view structure.
- All objects in the SELECT query of the view must be specified in two part naming conventions (schema_name.tablename).
- You cannot use * operator in the SELECT query inside the view (individually name the columns)
- All rules that apply for regular
CREATE VIEW v_schemabound WITH SCHEMABINDING AS SELECT ID, Name
FROM dbo.T2 — remember to use two part naming convention
- Indexed View:
19. What is an Indexed View?
- It is technically one of the types of View, not
- Using Indexed Views, you can have more than one clustered index on the same table if
- All the indexes created on a View and underlying table are shared by Query Optimizer to select the best way to execute the
- Both the Indexed View and Base Table are always in sync at any given
- Indexed Views cannot have NCI-H, always NCI-CI, therefore a duplicate set of the data will be
20. What does WITH CHECK do?
- WITH CHECK is used with a
- It is used to restrict DML operations on the view according to search predicate (WHERE clause) specified creating a
- Users cannot perform any DML operations that do not satisfy the conditions in WHERE clause while creating a view.
- WITH CHECK OPTION has to have a WHERE
21. What is a RANKING function and what are the four RANKING functions?
Ranking functions are used to give some ranking numbers to each row in a dataset based on some ranking functionality.
Every ranking function creates a derived column which has integer value. Different types of RANKING function:
ROW_NUMBER(): assigns an unique number based on the ordering starting with 1. Ties will be given different ranking positions.
RANK(): assigns an unique rank based on value. When the set of ties ends, the next ranking position will consider how many tied values exist and then assign the next value a new ranking with consideration the number of those previous ties. This will make the ranking position skip placement. position numbers based on how many of the same values occurred (ranking not sequential).
DENSE_RANK(): same as rank, however it will maintain its consecutive order nature regardless of
ties in values; meaning if five records have a tie in the values, the next ranking will begin with the next
<Ranking Function>() OVER(condition for ordering) — always have to have an OVER clause
SELECT SalesOrderID, SalesPersonID, TotalDue,
ROW_NUMBER() OVER(ORDER BY TotalDue), RANK() OVER(ORDER BY TotalDue),
DENSE_RANK() OVER(ORDER BY TotalDue) FROM Sales.SalesOrderHeader
- NTILE(n): Distributes the rows in an ordered partition into a specified number of
22. What is PARTITION BY?
- Creates partitions within the same result set and each partition gets its own ranking. That is, the rank starts from 1 for each
SELECT *, DENSE_RANK() OVER(PARTITION BY Country ORDER BY Sales DESC) AS
DenseRank FROM SalesInfo
23. What is Temporary Table and what are the two types of it? ○ They are tables just like regular tables but the main difference is its scope.
- The scope of temp tables is temporary whereas regular tables permanently reside. ○ Temporary table are stored in
- We can do all kinds of SQL operations with temporary tables just like regular tables like JOINs, GROUPING, ADDING CONSTRAINTS, etc.
- Two types of Temporary Table
#LocalTempTableName — single pound sign
Only visible in the session in which they are created. It is session-bound.
##GlobalTempTableName — double pound sign
Global temporary tables are visible to all sessions after they are created, and are deleted when the session in which they were created in is disconnected.
It is last logged-on user bound. In other words, a global temporary table will disappear when the last user on the session logs off.
24. Explain Variables ?
- Variable is a memory space (place holder) that contains a scalar value EXCEPT table variables, which is 2D
- Variable in SQL Server are created using DECLARE ○ Variables are BATCH-BOUND.
- Variables that start with @ are user-defined
25. Explain Dynamic SQL (DSQL). ?
Dynamic SQL refers to code/script which can be used to operate on different data-sets based on some dynamic values supplied by front-end applications. It can be used to run a template SQL query
against different tables/columns/conditions. Declare variables: which makes SQL code dynamic.
Main disadvantage of D-SQL is that we are opening SQL Tool for SQL Injection attacks. You should build the SQL script by concatenating strings and variable.
26. What is SQL Injection Attack?
- Moderator’s definition: when someone is able to write a code at the front end using DSQL, he/she could use malicious code to drop, delete, or manipulate the database. There is no perfect protection from it but we can check if there is certain commands such as ‘DROP’ or ‘DELETE’ are included in the command
- SQL Injection is a technique used to attack websites by inserting SQL code in web entry
27. What is SELF JOIN?
- JOINing a table to itself
- When it comes to SELF JOIN, the foreign key of a table points to its primary key. ○ Ex: Employee(Eid, Name, Title, Mid)
- Know how to implement it!!!
- It is a type of subquery in which the inner query depends on the outer query. This means that that the subquery is executed repeatedly, once for each row of the outer
- In a regular subquery, inner query generates a result set that is independent of the outer
FROM HumanResources.Employee E WHERE 5000 IN (SELECT S.Bonus
FROM Sales.SalesPerson S
WHERE S.SalesPersonID = E.EmployeeID)
- The performance of Correlated Subquery is very slow because its inner query depends on the outer So the inner subquery goes through every single row of the result of the outer subquery.
- Based on the above explanation, an inner subquery is independent from its outer subquery in Regular On the other hand, an inner subquery depends on its outer subquery in Correlated Subquery.
30. What are the differences between DELETE and TRUNCATE .?
DML statement that deletes rows from a table and can also specify rows using a WHERE clause. Logs every row deleted in the log file.
Slower since DELETE records every row that is deleted.
DELETE continues using the earlier max value of the identity column. Can have triggers on DELETE.
DDL statement that wipes out the entire table and you cannot delete specific rows.
Does minimal logging, minimal as not logging everything. TRUNCATE will remove the pointers that point to their pages, which are deallocated.
Faster since TRUNCATE does not record into the log file. TRUNCATE resets the identity column. Cannot have triggers on TRUNCATE.
31. What are the three different types of Control Flow statements?
32. What is Table Variable? Explain its advantages and disadvantages.?
- If we want to store tabular data in the form of rows and columns into a variable then we use a table ○ It is able to store and display 2D data (rows and columns).
- We cannot perform DDL (CREATE, ALTER, DROP).
- Table variables can be faster than permanent
- Table variables need less locking and logging
- Scope of Table variables is batch
- Table variables cannot have
- Table variables cannot have
- Table variables do not generate
- Cannot ALTER once declared (Again, no DDL statements).
33. What are the differences between Temporary Table and Table Variable?
It can perform both DML and DDL Statement. Session bound Scope Syntax CREATE TABLE #temp
Have indexes Table Variable:
Can perform only DML, but not DDL Batch bound scope DECLARE @var TABLE(…)
Cannot have indexes
34. What is Stored Procedure (SP)?
It is one of the permanent DB objects that is precompiled set of TSQL statements that can accept and return multiple variables.
It is used to implement the complex business process/logic. In other words, it encapsulates your entire business process.
Compiler breaks query into Tokens. And passed on to query optimizer. Where execution plan is generated the very 1st time when we execute a stored procedure after creating/altering it and same execution plan is utilized for subsequent executions.
Database engine runs the machine language query and execute the code in 0’s and 1’s.
When a SP is created all Tsql statements that are the part of SP are pre-compiled and execution plan is stored in DB which is referred for following executions.
Explicit DDL requires recompilation of SP’s.
35. What are the four types of SP?
System Stored Procedures (SP_****): built-in stored procedures that were created by Microsoft.
User Defined Stored Procedures: stored procedures that are created by users. Common naming convention (usp_****)
CLR (Common Language Runtime): stored procedures that are implemented as public static methods on a class in a Microsoft .NET Framework assembly.
Extended Stored Procedures (XP_****): stored procedures that can be used in other platforms such as Java or C++.
36. Explain the Types of .? ○ SP with no parameters:
- SP with a single input parameter:
- SP with multiple parameters:
- SP with output parameters:
Extracting data from a stored procedure based on an input parameter and outputting them using output variables.
- SP with RETURN statement (the return value is always single and integer value)
37. What are the characteristics of SP?
- SP can have any kind of DML and DDL statements. ○ SP can have error handling (TRY … CATCH).
- SP can use all types of table.
- SP can output multiple integer values using OUT parameters, but can return only one scalar INT ○ SP can take any input except a table variable.
- SP can set default
- SP can use
- SP can have nested
- SP cannot output 2D data (cannot return and output table variables).
- SP cannot be called from a SELECT statement. It can be executed using only a EXEC/EXECUTE
38. What are the advantages of SP?
- Precompiled code hence
- They allow modular programming, which means it allows you to break down a big chunk of code into smaller pieces of codes. This way the code will be more readable and more easier to
- Can enhance security of your application. Users can be granted permission to execute SP without having to have direct permissions on the objects referenced in the
- Can reduce network traffic. An operation of hundreds of lines of code can be performed through single statement that executes the code in procedure rather than by sending hundreds of lines of
code over the network.
- SPs are pre-compiled, which means it has to have an Execution Plan so every time it gets executed after creating a new Execution Plan, it will save up to 70% of execution time. Without it, the SPs are just like any regular TSQL
39. What is User Defined Functions (UDF)?
- UDFs are a database object and a precompiled set of TSQL statements that can accept parameters, perform complex business calculation, and return of the action as a
- The return value can either be single scalar value or result set-2D data. ○ UDFs are also pre- compiled and their execution plan is
- PASSING INPUT PARAMETER(S) IS/ARE OPTIONAL, BUT MUST HAVE A RETURN
40. What is the difference between Stored Procedure and UDF?
may or may not return any value. When it does, it must be scalar INT. Can create temporary tables.
Can have robust error handling in SP (TRY/CATCH, transactions). Can include any DDL and DML statements.
must return something, which can be either scalar/table valued. Cannot access to temporary tables.
No robust error handling available in UDF like TRY/ CATCH and transactions. Cannot have any DDL and can do DML only with table variables.
41. What are the types of UDF?
Deterministic UDF: UDF in which particular input results in particular output. In other words, the output depends on the input.
Non-deterministic UDF: UDF in which the output does not directly depend on the input.
- In-line UDF:
UDFs that do not have any function body(BEGIN…END) and has only a RETURN statement. In-line UDF must return 2D data.
- Multi-line or Table Valued Functions:
It is an UDF that has its own function body (BEGIN … END) and can have multiple SQL statements that return a single output. Also must return 2D data in the form of table variable.
42. What is the difference between a nested UDF and recursive UDF?
- Nested UDF: calling an UDF within an UDF
- Recursive UDF: calling an UDF within itself
43. What is a Trigger?
- It is a precompiled set of TSQL statements that are automatically executed on a particular DDL, DML or log-on
- Triggers do not have any parameters or return
- Triggers are the only way to access to the INSERTED and DELETED tables (aka. Magic Tables). ○ You can DISABLE/ENABLE Triggers instead of DROPPING them:
DISABLE TRIGGER <name> ON <table/view name>/DATABASE/ALL SERVER ENABLE TRIGGER <name> ON <table/view name>/DATABASE/ALL SERVER
44. What are the types of Triggers?
- DML Trigger
DML Triggers are invoked when a DML statement such as INSERT, UPDATE, or DELETE occur which modify data in a specified TABLE or VIEW.
A DML trigger can query other tables and can include complex TSQL statements. They can cascade changes through related tables in the database.
They provide security against malicious or incorrect DML operations and enforce restrictions that are more complex than those defined with constraints.
- DDL Trigger
Pretty much the same as DML Triggers but DDL Triggers are for DDL operations. DDL Triggers are at the database or server level (or scope).
DDL Trigger only has AFTER. It does not have INSTEAD OF.
- Logon Trigger
Logon triggers fire in response to a logon event.
This event is raised when a user session is established with an instance of SQL server. Logon TRIGGER has server scope.
45. What are ‘inserted’ and ‘deleted’ tables (aka. magic tables)?
- They are tables that you can communicate with between the external code and trigger
- The structure of inserted and deleted magic tables depends upon the structure of the table in a DML ○ UPDATE is a combination of INSERT and DELETE, so its old record will be in the deleted table and its new record will be stored in the inserted table.
46. What are some String functions to remember? LEN(string): returns the length of string.
UPPER(string) & LOWER(string): returns its upper/lower string
LTRIM(string) & RTRIM(string): remove empty string on either ends of the string LEFT(string): extracts a certain number of characters from left side of the string RIGHT(string): extracts a certain number of characters from right side of the string SUBSTRING(string, starting_position, length): returns the sub string of the string REVERSE(string): returns the reverse string of the string
Concatenation: Just use + sign for it
REPLACE(string, string_replaced, string_replace_with)
47. What are the three different types of Error Handling?
- TRY CATCH
The first error encountered in a TRY block will direct you to its CATCH block ignoring the rest of the code in the TRY block will generate an error or not.
stores the error code for the last executed SQL statement. If there is no error, then it is equal to 0. If there is an error, then it has another number (error code).
- RAISERROR() function
A system defined function that is used to return messages back to applications using the same format which SQL uses for errors or warning message.
48. Explain about Cursors ..?
- Cursors are a temporary database object which are used to loop through a table on row-by-row There are five types of cursors:
- Static: shows a static view of the data with only the changes done by session which opened the cursor.
- Dynamic: shows data in its current state as the cursor moves from record-to-record.
- Forward Only: move only record-by-record
- Scrolling: moves anywhere.
- Read Only: prevents data manipulation to cursor data set.
49. What is the difference between Table scan and seek ?
- Scan: going through from the first page to the last page of an offset by offset or row by ○ Seek: going to the specific node and fetching the information needed.
- ‘Seek’ is the fastest way to find and fetch the data. So if you see your Execution Plan and if all of them is a seek, that means it’s
50. Why are the DML operations are slower on Indexes?
- It is because the sorting of indexes and the order of sorting has to be always
- When inserting or deleting a value that is in the middle of the range of the index, everything has to be rearranged It cannot just insert a new value at the end of the index.
51. What is a heap (table on a heap)?
- When there is a table that does not have a clustered index, that means the table is on a heap. ○ Ex: Following table ‘Emp’ is a table on a
SELECT * FROM Emp WHERE ID BETWEEN 2 AND 4 — This will do scanning.
52. What is the architecture in terms of a hard disk, extents and pages?
- A hard disk is divided into
- Every extent has eight
- Every page is 8KBs ( 8060 bytes).
53. What are the nine different types of Indexes?
- Full Text Index
- Index View
54. What is a Clustering Key?
- It is a column on which I create any type of index is called a Clustering Key for that particular
55. Explain about a Clustered Index.?
- Unique Clustered Indexes are automatically created when a PK is created on a
- But that does not mean that a column is a PK only because it has a Clustered
- Clustered Indexes store data in a contiguous manner. In other words, they cluster the data into a certain spot on a hard disk
- The clustered data is ordered
- You can only have one CI on a
56. What happens when Clustered Index is created?
- First, a B-Tree of a CI will be created in the
- Then it will physically pull the data from the heap memory and physically sort the data based on the clustering
- Then it will store the data in the leaf
- Now the data is stored in your hard disk in a continuous
57. What are the four different types of searching information in a table?
- Table Scan -> the worst way
- Table Seek -> only theoretical, not possible ○ 3. Index Scan -> scanning leaf nodes
- Index Seek -> getting to the node needed, the best way
58. What is Fragmentation .?
- Fragmentation is a phenomenon in which storage space is used
- In SQL Server, Fragmentation occurs in case of DML statements on a table that has an
- When any record is deleted from the table which has any index, it creates a memory bubble which causes
- Fragmentation can also be caused due to page split, which is the way of building B-Tree dynamically according to the new records coming into the
- Taking care of fragmentation levels and maintaining them is the major problem for
- Since Indexes slow down DML operations, we do not have a lot of indexes on OLTP, but it is recommended to have many different indexes in
59. What are the two types of fragmentation?
- Internal Fragmentation
It is the fragmentation in which leaf nodes of a B-Tree is not filled to its fullest capacity and contains memory
- External Fragmentation
It is fragmentation in which the logical ordering of the pages does not match the physical ordering of the pages on the secondary storage device.
60. What are Statistics?
- Statistics allow the Query Optimizer to choose the optimal path in getting the data from the underlying table. ○ Statistics are histograms of max 200 sampled values from columns separated by
- Every statistic holds the following info:
- The number of rows and pages occupied by a table’s data
- The time that statistics was last updated
- The average length of keys in a column
- Histogram showing the distribution of data in column
61. What are some optimization techniques in SQL?
- Build indexes. Using indexes on a table, It will dramatically increase the performance of your read operation because it will allow you to perform index scan or index seek depending on your search predicates and select predicates instead of table
Building non-clustered indexes, you could also increase the performance further.
- You could also use an appropriate filtered index for your non clustered index because it could avoid performing
a key lookup.
- You could also use a filtered index for your non-clustered index since it allows you to create an index on a particular part of a table that is accessed more frequently than other parts.
- You could also use an indexed view, which is a way to create one or more clustered indexes on the same
In that way, the query optimizer will consider even the clustered keys on the indexed views so there might be a possible faster option to execute your query.
- Do table partitioning. When a particular table as a billion of records, it would be practical to partition a table so that it can increase the read operation Every partitioned
table will be considered as physical smaller tables internally.
- Update statistics for TSQL so that the query optimizer will choose the most optimal path in getting the data
from the underlying table. Statistics are histograms of maximum 200 sample values from columns separated by
- Use stored procedures because when you first execute a stored procedure, its execution plan is stored and the
same execution plan will be used for the subsequent executions rather than generating an execution plan every
- Use the 3 or 4 naming conventions. If you use the 2 naming convention, table name and column name, the SQL engine will take some time to find its By specifying the schema name or
even server name, you will be able to save some time for the SQL server.
- Avoid using SELECT *. Because you are selecting everything, it will decrease the performance. Try to select columns you
- Avoid using CURSOR because it is an object that goes over a table on a row-by-row basis, which is similar to the table It is not really an effective way.
- Avoid using unnecessary TRIGGER. If you have unnecessary triggers, they will be triggered Not only slowing the performance down, it might mess up your whole program as well.
- Manage Indexes using RECOMPILE or
The internal fragmentation happens when there are a lot of data bubbles on the leaf nodes of the b-tree and the leaf nodes are not used to its fullest capacity. By recompiling, you can push the actual data on the b-tree to the left side of the leaf level and push the memory bubble to the right side. But it is still a temporary solution because the memory bubbles will still exist and won’t be still accessed much.
The external fragmentation occurs when the logical ordering of the b-tree pages does not match the physical ordering on the hard disk. By rebuilding, you can cluster them all together, which will solve not only the internal but also the external fragmentation issues. You can check the status of the fragmentation by using Data Management Function, sys.dm_db_index_physical_stats(db_id, table_id, index_id, partition_num, flag), and looking at the columns, avg_page_space_used_in_percent for the internal fragmentation and avg_fragmentation_in_percent for the external fragmentation.
- Try to use JOIN instead of SET operators or SUB-QUERIES because set operators and sub- queries are slower than joins and you can implement the features of sets and sub-queries using
- Avoid using LIKE operators, which is a string matching operator but it is mighty
- Avoid using blocking operations such as order by or derived
- For the last resort, use the SQL Server Profiler. It generates a trace file, which is a really detailed version of execution plan. Then DTA (Database Engine Tuning Advisor) will take a trace file as its input and analyzes it and gives you the recommendation on how to improve your query
62. How do you present the following tree in a form of a table?
/ \ / \
D E F G
CREATE TABLE tree ( node CHAR(1), parent Node CHAR(1), [level] INT) INSERT INTO tree VALUES (‘A’, null, 1),
(‘B’, ‘A’, 2),
(‘C’, ‘A’, 2),
(‘D’, ‘B’, 3),
(‘E’, ‘B’, 3),
(‘F’, ‘C’, 3),
(‘G’, ‘C’, 3)
SELECT * FROM tree Result:
A NULL 1
B A 2
C A 2
D B 3
E B 3
F C 3
G C 3
63. How do you reverse a string without using REVERSE (‘string’) ?
CREATE PROC rev (@string VARCHAR(50)) AS BEGIN
DECLARE @new_string VARCHAR(50) = ”
DECLARE @len INT = LEN(@string) WHILE (@len <> 0)
DECLARE @char CHAR(1) = SUBSTRING(@string, @len, 1) SET @new_string = @new_string + @char
SET @len = @len – 1 END
PRINT @new_string END
EXEC rev ‘dinesh’
64. What is Deadlock?
- Deadlock is a situation where, say there are two transactions, the two transactions are waiting for each other to release their
- The SQL automatically picks which transaction should be killed, which becomes a deadlock victim, and roll back the change for it and throws an error message for
65. What is a Fact Table?
The primary table in a dimensional model where the numerical performance measurements (or facts) of the
business are stored so they can be summarized to provide information about the history of the operation of an
We use the term fact to represent a business measure. The level of granularity defines the grain of the fact table.
66. What is a Dimension Table?
Dimension tables are highly denormalized tables that contain the textual descriptions of the business and facts in their fact table.
Since it is not uncommon for a dimension table to have 50 to 100 attributes and dimension tables tend to be relatively shallow in terms of the number of rows, they are also called a wide table.
A dimension table has to have a surrogate key as its primary key and has to have a business/alternate key to link between the OLTP and OLAP.
67. What are the types of Measures?
- Additive: measures that can be added across all dimensions (cost, sales).
- Semi-Additive: measures that can be added across few dimensions and not with
- Non-Additive: measures that cannot be added across all dimensions (stock rates).
68. What is a Star Schema?
- It is a data warehouse design where all the dimensions tables in the warehouse are directly connected to the
- The number of foreign keys in the fact table is equal to the number of dimensions. ○ It is a simple design and hence faster
69. What is a Snowflake Schema?
- It is a data warehouse design where at least one or more multiple dimensions are further ○ Number of dimensions > number of fact table foreign keys
- Normalization reduces redundancy so storage wise it is better but querying can be affected due to the excessive joins that need to be
70. What is granularity?
- The lowest level of information that is stored in the fact table. ○ Usually determined by the time dimension
- The best granularity level would be per transaction but it would require a lot of
71. What is a Surrogate Key?
- It is a system generated key that is an identity column with the initial value and incremental value and ensures the uniqueness of the data in the dimension
- Every dimension table must have a surrogate key to identify each record!!!
72. What are some advantages of using the Surrogate Key in a Data Warehouse?
- Using a SK, you can separate the Data Warehouse and the OLTP: to integrate data coming from heterogeneous sources, we need to differentiate between similar business keys from the OLTP. The
keys in OLTP are the alternate key (business key).
- Performance: The fact table will have a composite key. If surrogate keys are used, then in the fact table, we will have integers for its foreign keys.
- This requires less storage than
- The queries will run faster when you join on integers rather than
- The partitioning done on SK will be faster as these are in
- Historical Preservation: A data warehouse acts as a repository of historical data so there will be various versions of the same record and in order to differentiate between them, we need a SK then we can keep the history of data.
- Special Situations (Late Arriving Dimension): Fact table has a record that doesn’t have a match yet in the dimension table. Surrogate key usage enables the use of such a ‘not found’ record as a SK is not dependent on the
73. What is the datatype difference between a fact and dimension tables?
- Fact Tables
They hold numeric data. They contain measures. They are deep.
- Dimensional Tables They hold textual data.
They contain attributes of their fact tables.
They are wide.
74. What are the types of dimension tables?
- Conformed Dimensions
- when a particular dimension is connected to one or more fact tables. ex) time dimension ○ 2. Parent-child Dimensions
- A parent-child dimension is distinguished by the fact that it contains a hierarchy based on a recursive
- when a particular dimension points to its own surrogate key to show an unary relationship. ○ 3. Role Playing Dimensions
- when a particular dimension plays different roles in the same fact table. ex) dim_time and orderDateKey, ..usually a time dimension table.
- Role-playing dimensions conserve storage space, save processing time, and improve database manageability .
- Slowly Changing Dimensions: A dimension table that have data that changes slowly that occur by inserting and updating of records.
- Type 0: columns where changes are not allowed – no change ex) DOB, SSNm
- Type 1: columns where its values can be replaced without adding its new row – replacement
- Type 2: for any change for the value in a column, a new record it will be added – historical data.
values are saved in records marked as outdated. For even a single type 2 column, startDate, EndDate, and status are needed.
- Type 3: advanced version of type 2 where you can set up the upper limit of history which drops the oldest record when the limit has been reached with the help of outside SQL implementation.
- Type 0 ~ 2 are implemented on the column
- Degenerated Dimensions: a particular dimension that has an one-to-one relationship between itself and the
- When a particular Dimension table grows at the same rate as a fact table, the actual dimension can be removed and the dimensions from the dimension table can be inserted into the actual fact
- You can see this mostly when the granularity level of the the facts are per
- g. The dimension salesorderdate (or other dimensions in DimSalesOrder would grow everytime a sale is made therefore the dimension (attributes) would be moved into the fact table.
- Junk Dimensions: holds all miscellaneous attributes that may or may not necessarily belong to any other dimensions. It could be yes/no, flags, or long open-ended text data.
75. What is your strategy for the incremental load?
The combination of different techniques for the incremental load in my previous projects; time stamps, CDC (Change Data Capture), MERGE statement and CHECKSUM() in TSQL, LEFT OUTER JOIN, TRIGGER, the Lookup Transformation in SSIS.
76. What is CDC?
CDC (Change Data Capture) is a method to capture data changes, such as INSERT, UPDATE and DELETE,
happening in a source table by reading transaction log files. Using CDC in the process of an incremental load, you
are going to be able to store the changes in a SQL table, enabling us to apply the changes to a target table incrementally.
In data warehousing, CDC is used for propagating changes in the source system into your data warehouse,
updating dimensions in a data mart, propagating standing data changes into your data warehouse and such.
The advantages of CDC are:
- It is almost real time
- It can handle small volume of
- It can be more efficient than
- It can be
- It can be used to configurable clean Disadvantages of CDC are:
- Lots of change tables and functions
- Bad for big changes g. truncate & reload Optimization of CDC:
- Stop the capture job during load
- When applying changes to target, it is ideal to use
77. What is the difference between a connection and session ?
- Connection: It is the number of instance connected to the database. An instance is modelized soon as the application is
- Session: A session run In one connection, it allowed multiple sessions for one connection.
78. What are all different types of collation sensitivity?
Following are different types of collation sensitivity – Case Sensitivity – A and a and B and
Kana Sensitivity – Japanese Kana characters.
Width Sensitivity – Single byte character and double byte character.
79. What is CLAUSE?
SQL clause is defined to limit the result set by providing condition to the query. This usually filters some rows from the whole set of records.
Example – Query that has WHERE condition Query that has HAVING condition.
80. What is Union, minus and Interact commands?
UNION operator is used to combine the results of two tables, and it eliminates duplicate rows from the tables.
MINUS operator is used to return rows from the first query but not from the second query. Matching records of first and second query and other rows from the first query will be displayed as a result set.
INTERSECT operator is used to return rows returned by both the queries.
81. How to fetch common records from two tables?
Common records result set can be achieved by -.
Select studentID from student. <strong>INTERSECT </strong> Select StudentID from Exam
82. How to fetch alternate records from a table?
Records can be fetched for both Odd and Even row numbers -. To display even numbers-.
Select studentId from (Select rowno, studentId from student) where mod(rowno,2)=0 To display odd numbers-.
Select studentId from (Select rowno, studentId from student) where mod(rowno,2)=1 from (Select rowno, studentId from student) where mod(rowno,2)=1.[/sql]
83. How to select unique records from a table?
Select unique records from a table by using DISTINCT keyword. Select DISTINCT StudentID, StudentName from Student.
84. How to remove duplicate rows from table?
Step 1: Selecting Duplicate rows from table
Select rollno FROM Student WHERE ROWID <>
(Select max (rowid) from Student b where rollno=b.rollno); Step 2: Delete duplicate rows
Delete FROM Student WHERE ROWID <>
(Select max (rowid) from Student b where rollno=b.rollno);
85. What is ROWID and ROWNUM in SQL?
- ROWID is nothing but Physical memory allocation
- ROWID is permanant to that row which identifies the address of that row. ROWID is 16 digit Hexadecimal number which is uniquely identifies the rows. 4.ROWID returns PHYSICAL ADDRESS of that row.
- ROWID is automatically generated unique id of a row and it is generated at the time of insertion of
- ROWID is the fastest means of accessing
- ROWNUM is nothing but the sequence which is allocated to that data retreival
- ROWNUM is tempararily allocated sequence to the
- ROWNUM is numeric sequence number allocated to that row 4.ROWNUM returns the sequence number to that row.
- ROWNUM is an dynamic value automatically retrieved along with select statement output. 6.ROWNUM is not related to access of data.
86. How to find count of duplicate rows?
Select rollno, count (rollno) from Student
Group by rollno Having count (rollno)>1 Order by count (rollno) desc;
87. How to find Third highest salary in Employee table using self-join?
Select * from Employee a Where 3 = (Select Count (distinct Salary) from Employee where a.salary<=b.salary;
88. How to display following using query?
We cannot use dual table to display output given above. To display output use any table. I am using Student
SELECT lpad (‘*’, ROWNUM,’*’) FROM Student WHERE ROWNUM <4;
89. How to display Date in DD-MON-YYYY table?
Select to_date (Hire_date,’DD-MON-YYYY’) Date_Format from Employee;
90. If marks column contain the comma separated values from Student table. How to calculate the count of that comma separated values?
Student Name Marks Dinesh 30,130,20,4
Select Student_name, regexp_count (marks,’,’) + As “Marks Count” from Student;
91. What is query to fetch last day of previous month in oracle?
Select LAST_DAY (ADD_MONTHS (SYSDATE,-1)) from dual;
92. How to display the String vertically in Oracle?
SELECT SUBSTR (‘AMIET’, LEVEL, 1) FROM dual Connect by level <= length (‘AMIET’);
93. How to display departmentwise and monthwise maximum salary?
Select Department_no, TO_CHAR (Hire_date,’Mon’) as Month from Employee group by Department_no, TO_CHAR (Hire_date,’mon’);
94. How to calculate number of rows in table without using count function?
Select table_name, num_rows from user_tables where table_name=’Employee’;
Tip: User needs to use the system tables for the same. So using user_tables user will get the number of rows in the table
95. How to fetch common records from two different tables which has not any joining condition
Select * from Table1 Intersect
Select * from Table2;
96. Explain Execution Plan.?
Query optimizer is a part of SQL server that models the way in which the relational DB engine works and comes up with the most optimal way to execute a query. Query Optimizer takes into account amount of resources used, I/O and CPU processing time etc. to generate a plan that will allow query to execute in most efficient and faster manner. This is known as EXECUTION PLAN.
Optimizer evaluates a number of plans available before choosing the best and faster on available. Every query has an execution plan.
Definition by the mod: Execution Plan is a plan to execute a query with the most optimal way which is generated by Query Optimizer. Query Optimizer analyzes statistics, resources used, I/O and CPU
processing time and etc. and comes up with a number of plans. Then it evaluates those plans and the most optimized plan out of the plans is Execution Plan. It is shown to users as a graphical flow chart that should be read from right to left and top to bottom.