A Guide to Fix Netgear Router Orange Power Light Issue

3 minutes, 49 seconds Read

Are you continuously getting Netgear router orange power light issues? Is your router getting slow because of this issue? If your answer to both questions is yes, you will be relieved to know that this post can help you. So, without further ado, stick to this 5-minute read and learn about how to fix the “Netgear router orange power light” issue in minutes.

Before proceeding further, let us tell you, no matter whether you have performed the Netgear WNDR4500 setup or configured another Netgear router model, the troubleshooting tips provided here are applicable to all. Continue reading!

Fixed: Netgear Router Orange Light

Fix 1: Restart Your Router

The “Netgear router orange power light” issue can be fixed using many troubleshooting tips. But, first, you must apply the basic yet simple tip to fix the issue. Yes, rebooting is one of the most sophisticated hacks known for fixing many big or small router-related issues.

Here are steps to power cycle/ restart your Netgear router:

First of all, it is recommended that you unplug your Netgear router from its electrical outlet.

Now, you must wait for a couple of minutes.

Turn the router on. Plug it back in.

Does the “Netgear router orange power light” issue persist after a restart? Don’t blow a fuse! The next troubleshooting hack will surely prove helpful.

Fix 2: Update Firmware

You can try updating the router’s firmware by accessing its firmware update page using the correct username and password to fix the “Netgear router orange power light” issue. Get your router up-to-date with the latest firmware version using the steps outlined below:

  • Connect your modem to your modem with an Ethernet cable.
  • Navigate to the device’s official site.
  • Enter your Netgear router’s Model Number, click Downloads, and select a firmware version available for your router’s model.
  • Done doing that? If yes, click Download and unzip the file.
  • After that, open a web browser, and enter in the URL bar to access the router login page.
  • Over here, it is suggested to enter the router admin details very carefully and select Advanced or Settings then the Administration option.
  • Select Firmware Update and click on Upload.

The firmware update process will start and your Netgear router will reboot once the process gets completed. So, you have to wait patiently. But, when the firmware update process is going on, do not go online, turn off the router, click the back button, etc. Got it?

Fix 3: Place Your Devices Closer

If you are still getting “Netgear router orange power light” issue, then chances are there is too much distance between your existing modem and the Netgear device. To get the issue fixed. Your router and modem are supposed to be next to one another. The use of a wired source, as opposed to a wireless source, is also suggested. Apart from that, use only an Ethernet cable that is free of any sort of damage and cuts.

Fix 4: Give Your ISP a Call

Still “Netgear router orange power light” issue spinning your head? No worries! There is a possibility that your internet connection is slow. So, it is best to give your internet service provider a call. You should request him to take immediate action to resolve the slow internet issue.

Once the slow internet issue gets fixed, you will experience that the “Netgear router orange power light” issue is resolved already. Do we hope it is? If not, then try the last yet effective hack.

Fix 5: Reconfigure Your Netgear Router

On the off chance that you are still getting the “Netgear router orange power light” issue, it is probably because you did not do the Netgear router setup process properly. Don’t get hyped. To get the issue fixed on the fly, you must try settings up your Netgear router again, like the very first time you did. You can easily do Netgear router setup either using the manual method, WPS method, or using the instructions provided on the Netgear app.

But, before reconfiguring your Netgear router, you have to reset it back to factory default settings.

Here’s how you can reset the router:

  • First of all, locate the reset hole on your router
  • Then, you have to press it
  • Hold it patiently for some time and release it

Once you are done finishing the router reset process, see if the “Netgear router orange power light” issue is fixed. If your answer is yes, then we would like to congratulate you. We always wish the best for our users.

Also Read: Short Guide to Fix Orbi Pink Light Issue

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *