Several users try to perform TP-Link firmware updates by accessing the tplinkrepeater.net login page but end up failing miserably. In case you are also unable to update the firmware of your networking device, then this post is for you. Here, we have talked in detail about how this issue can be resolved with only a few tips. Thus, wait no more and get down to reading this instant.
[Resolved] TP-Link Extender Firmware Update Failed Issue
Restart the TP Link Extender
The number one and most common reason behind the TP-Link extender firmware update failure issue is technical glitches. To get rid of them, a simple effort needs to be made from your end. And that requires you to restart your TP-Link wireless range extender.
Check the Weak Connection for TP-Link firmware
Another common reason behind the TP-Link extender firmware update failure is a weak internet connection. A weak internet connection depends on how nicely your TP-Link wireless range extender and the host router are. In case the Ethernet cable connecting the devices is damaged, then the connection will be weak.
Therefore, it is recommended that you step out of your house as well as your comfort zone and get a new Ethernet cable. This will hopefully help you to resolve the extender firmware update failure issue. On the off chance, it does not then consider using a wireless medium to connect the networking devices.
Pull the WiFi Devices Closer
If there is too much distance between the networking devices, it can become another reason behind the TP-Link extender update failure issue. To take care of the problem, the solution is quite simple, i.e. you have got to pull the networking devices a little closer.
Apart from this, ensure that the distance is not too less. That can force the signals of your device to clash and cause other issues for you. Therefore, it is recommended that you maintain a safe distance TP-Link wireless range extender and the host router. It should neither be too much nor too less.
Download the Right Version
In case you are still a victim of the TP-Link extender update failure issue, then it is because you have downloaded the wrong version of firmware for your device. Perhaps, you downloaded one that is not compatible with your device.
To troubleshoot the issue, consider performing an extender firmware update again and this time make sure that you only download the compatible version. In case, you are still not able to fix the issue at hand, then it is probably because the next troubleshooting hack is the one that you need to follow.
Use the Correct Admin Details
To access the TP-Link extender setup wizard, using the correct username and password is required. And if that is exactly what you entered wrong, then it is no shocker why you are unable to perform the TP-Link extender firmware update.
Thus, consider using the right password and username to access the main dashboard of your wireless range extender. Once done, try to update the firmware of your range extender or repeater.
Make Use of the TP-Link App
In case you have still got your knickers in a twist because of the TP-Link extender firmware update failure issue, then it is because the manual method is not suiting you well. In this case, it is recommended that you use the Tplink app to execute the TP-Link extender firmware update process.
The Bottom Line
With the troubleshooting hacks mentioned in this article, you will be able to perform a TP-link extender firmware update. Which was the hack that you found the most helpful while walking through this post? Would you like to share your answer with your fellow readers? Is that a yes that we see? Well then, waste no more time and make use of the comment section to share your answer with your fellow readers. They will surely appreciate the effort. Plus, there is a possibility that the hack which helped you out might help them out as well to troubleshoot the TP-Link extender firmware update failure issue.
Read more- Explicit Guide to Fix Rockspace AC1200 Extender Setup Issues